| Shift Display Device Model CB87 |
|
||
|
|
|
H) Value increasing with clockwise rotation.
Value decreasing with counterclockwise rotation. A) Value increasing with counterclockwise rotation. Value decreasing with clockwise rotation. |
| RATIO | ENDLESS SCREW PITCH (mm) | READING AFTER ROTATION | MÁX. SPEED (mm) | ||
|---|---|---|---|---|---|
| 1 : 05 | 0.5 | 00005 mm | 500 | ||
| 1 : 10 | 1 | 00010 mm | 300 | ||
| 1 : 15 | 1.5 | 00015 mm | 300 | ||
| 1 : 20 | 2 | 00020 mm | 000 07" | 300 | |
| 1 : 25 | 2.5 | 00025 mm | 300 | ||
| 1 : 30 | 3 | 00030 mm | 300 | ||
| 1 : 40 | 4 | 00040 mm | 000 15" | 200 | |
| 1 : 50 | 5 | 00050 mm | 000 19" | 200 | |
| 1 : 60 | 6 | 00060 mm | 200 | ||
| 1 : 100 | 10 | 00100 mm | 000 39" | 150 | |
| 1 : 120 | 12 | 00120 mm | 150 | ||
|
Specifications: It is a digital display of 5 digits for regularion and direct reading of any angle or shift obtained by rotation of a drive axle. ·Counter of 5 digits: reading up to 9.999,9 ·height of digits: 6 mm. ·Standard hole for the shaft: 20 mm. Other smaller hole sizes with reduction cylinder on request. ·Execution based on the relevant endless screw pitch. |
|
VIEW A (Horizontal axle) |
VIEW B (Vertical axle) |
VIEW C (Horizontal axle) |
VIEW D (Horizontal axle) |
|
 |
 |
 |
 |
 |
Contact with us: Tel: +34.902.10.71.69 | |